M Karthic, K Chockalingam, C Vignesh, KJ Nagarajan, "Enhancement of Mechanical and Biological Properties of PEEK/GO/HA Composite Scaffolds Fabricated Through 3D Printing and Sintered Process for Bone Tissue Engineering" Polymer-Plastics Technology and Materials (Q2 , IF - 2.7)
Extraction of lignocellulosic fiber and cellulose microfibrils from agro waste-palmyra fruit peduncle: Water retting, chlorine-free chemical treatments, physio-chemical, morphological, and thermal characterization, International Journal of Biological Macromolecules (Q1 – 1.19, Impact Factor - 8.2)
Manoharan Karthic, Kunjan Chockalingam, Chandran Vignesh, K Jawaharlal Nagarajan "Characterization of 3D-printed graphene-reinforced PLA scaffold for bone regeneration" Emerging Materials Research (Q3, IF 2.0)
G.R. Raghav, K.J. Nagarajan, M.Palaninatharaja, M. Karthic, R. Ashok kumar , M.A. Ganesh "Reuse of used paper egg carton boxes as a source to produce hybrid AgNPscarboxyl nanocellulose through bio-synthesis and its application in active food packaging" International Journal of Biological Macromolecules, 249 & 126119, 2023 (Q1 – 1.19, Impact Factor - 8.2)
Karthic. M., K.Chockalingam., and SS ram "Prediction of tensile strength in fused deposition modeling process using artificial neural network technique"AIP Conference Proceedings, Volume 23117 December 2020 (Scopus Indexed)
K.Chockalingam.,N.Jawahar., U.Chandrasekar., J.Praveen and M.Karthic “Development of process model for optimal selection of process parameters for geometric tolerances and surface roughness in Stereolithography” International journal of advanced design and manufacturing technology.
K.Chockalingam.,M.Karthic., and N.Jawahar "Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling" 2018, Vol. 11, Issue 2, PP. 27-37.
Conferences
Presented a paper titled "Prediction of tensile strength in fused deposition modeling process using artificial neural network technique" in3rd International Conference on Frontiers in Automobile and Mechanical Engineering (FAME 2020) by the School of Mechanical Engineering at Sathyabama Institute of Science and Technology (Deemed to be University), Chennai.
M.Karthic., K.Chockalingam., and N. Jawahar “Influence of FDM process parameters on part deformation and its comparison with 3D FEA simulation” Proceedings of 1st International conference on Materials, Design and Manufacturing process 2016, pp. 658-663.
Consultancy
NAME OF INDUSTRY
DETAILS
PERIOD
M/s Thiagarjar Telecom Solutions Limited
Consultancy
14-12-2021 to 29-03-2022
M/s Karthik Engineering
CNC Manufacutring
03-12-2021 to 03-12-2021
M/s Thiagarjar Telecom Solutions Limited
Consultancy
01-10-2020 to 30-11-2021
Seminar, Conference, Workshop Attended
Laboratory Management & Internal Audit as per ISO / IEC 17025:2017 conducted by Central Manufacturing Technology Institute (CMTI), Bangalore, 24-04-2023 to 27-04-2023
Powering IOT using Arduino and Rashberry PI conducted by Skills DA Center for Advanced Training, Chennai jointly with Government of Tamilnadu, 19-09-2022 to 23-09-2022
Five days AICTE Training And Learning (ATAL) Academy Online FDP on Manufacturing and Characterization of 3D Printed Materials conducted by Sant Longowal Institute of Engineering and Technology, Longowal, 13-12-2021 to 17-12-2021
Attended 4 days Virtual Workshop on Additive Manufacturing organized by ATAL Incubation Centre -PEC Foundation, 18-08-2021 to 21-08-2021
Successfully completed the AICTE Approved Eight modules organized by National Initiative for Technical Teachers Training (NITTT), India, , 01-01-2021 to 30-11-2021
The 3D Printing Revolution course certificate received from University of ILLINOIS through Coursera. ( Score is 100%), 22-06-2020 to 01-07-2020
Certificate of Achievement received from IIT Bombay for Succesfully completion of LaTeX101X: LaTeX for Students, Engineers and Scientists through EdX., 18-05-2020 to 29-06-2020
Attended Indo US Sponsored Workshop on "Metal Additive Manufacturing - Technology Gaps and Research Directions" at Hotel Residency organized by PSG Institute of Advanced Studies., 16-12-2019 to 18-12-2019
NPTEL - AICTE FDP on Engineering Metrology (12 Weeks course) and got silver medal certificate with a score of 80%, 01-07-2019 to 31-10-2019
Attended AICTE CEP QIP Sponsored Short Term course on "Additive Manufacturing" conducted by Department of Mechanical Engineering, Indian Institute of Technology, Kanpur., 11-02-2019 to 15-02-2019
Attended AICTE QIP sponsored One week short term course on "Design, Manufacturing and characterization of micro and nano composites" at TCE Madurari. , 30-01-2019 to 05-02-2019
One day TEQIP III sponsored workshop on "Medical Informatics" organized by Department of Mathematics, Thiagarajar College of Engineering, Madurai - 625015., 17-12-2018 to 17-12-2018
Got Honor code Certificate for One Month online course on SKVIZ101x: Fundamentals of 3D Visualization an online course conducted from 29 August 2018 to 07 October 2018 by Indian Institute of Technology Bombay., 29-08-2018 to 07-10-2018
Short Term Course under Technical Education Quality Improvement Programme III on "Rural Industries Establishment Sustainability and Challenges" organized by Center for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi 110 016,, 27-06-2018 to 29-06-2018
One day Workshop on "Mentoring Skills" organized by Counseling Cell of Thiagarajar College of Engineering in association with M.S. Chella Muthu Trust and Research Foundation, Madurai,, 24-03-2018 to 24-03-2018
Attended AICTE QIP sponsered one week short term course on "Machine Learning techniques for manufacturing optimization" at TCE Madurai., 14-12-2017 to 20-12-2017
TEQIP Sponsored a three dayworkshop on “Linear Algebra for Researchers and Engineers” at TCE, Madurai, , 02-03-2017 to 03-03-2017
TEQIP sponsored one day Faculty Development workshop on "Modelling of Engineering systems using Bond Graphs" at TCE Madurai, , 20-02-2017 to 20-02-2017
TEQIP Sponsored Short term training program on “Applied Sensor Technologies” TCE, Madurai, , 17-02-2017 to 18-02-2017
TEQIP sponsored two day workshop on "Orientation program" at TCE Madurai, , 15-02-2017 to 16-03-2017
Attended one day workshop on “Abaqus FEA Software – A Complete solutions for realistic simulation”organized by Department of Mechanical Engineering, MEPCO SCHLENK Engineering College. , 19-02-2016 to 19-02-2016
Seminar, Conference, Workshop Organised
Organised One week AICTE QIP Sponsored Short Term Course on "Design, Manufacturing, Analysis of Implants with bio Materials and its characterization" , 11-03-2019 to 17-03-2019
Organised one day TEQIP-SPFU sponsored workshop on “Best Practice sharing- Professionalism” to Faculty members of TCE , 20-03-2017 to 20-03-2017
Organised Two day TEQIP sponsored workshop on "Project Management" to Faculty members of TCE , 16-03-2017 to 17-03-2017
Staff coordinator for Two day national level workshop cum championship on “QuadcopterDevelopment”organized by Department of Mechanical Engineering, Sethu Institute of Technology in association with IIT-Roorkee. , 19-09-2016 to 20-09-2016
Student Coordinator of 3D Printing, a one credit course conducted by the Mechanical department of Thiagarajar college of Engineering (Sponsored by TEQIP)., 01-01-0001 to 01-01-0001
M.E./Ph.D. Scholars
NAME OF SCHOLAR
COURSE
AREA OF RESEARCH
STATUS
GOPI NATH
M.E/M.S
Additive Manufacturing – Enhancement of Dimensional accuracy through CVD process
Completed
Lectures Delivered
TOPIC
DELIVERED AT
PERIOD
3D Printing in Education
ISHARE - VIshakhapatnam
18-07-2020 to 18-07-2020
Demo and Hands on Training on 3D Printing Machine
Thigarajar College of Engineering
14-03-2019 to 14-03-2019
Awards and Honours
Awarded BEST OUTGOING STUDENT of the Discipline during the period 2014-2016., Thiagarajar college of Engineering
Awarded with Silver medal for RANK HOLDER during the year 2014-2015 and 2015-2016., Thiagarajar college of Engineering
Other Achievements
Management Incentive TCE
Summer Faculty Research Fellowship Programme 2018 under the mentorship of Prof. Pulak Mohan Pandey, Department of Mechanical Engineering, IIT Delhi
Awarded Best Outgoing Sports Person of the Discipline
Won Gold Medal in 30th sub-junior volleyball tournament conducted by Volleyball Federation of India
Won Silver Medal in All India rural sports tournament conducted by Ministry of youth affairs and sports.
