Centre of Excellence in Electronic Product Testing (CEEPT)
Centre of Excellence in Electronic Product Testing
About the Centre
Thiagarajar College of Engineering has established a Centre of Relevance and Excellence (CORE) in Wireless Technologies under TIFAC (Technology, Information, Forecasting and Assessment Council) Mission REACH (Relevance and Excellence in Achieving new heights in educational institutions) Program of Department of Science and Technology, Government of India in 2005. TIFAC CORE on Wireless Technologies has laboratory facilities in the areas of RF systems and Baseband Processing. With the extended infrastructure such as Antenna, RF, VLSI and Embedded products testing facility, the centre has evolved as Centre of Excellence in Electronic Product Testing. The Centre of Excellence in Electronic Product Testing (CEEPT) is dedicated to serve as a hub for testing of electronic hardware products across a broad frequency range, catering to wireless and defence industries. CEEPT has a well-established laboratory providing testing facility for Electronic PCB products and antennas as detailed below:
- Mixed Signal board validation
- Embedded board testing
- Communication test benches
- RF component testing
- Antenna Design and Testing
- Anechoic chamber for Antenna testing facility
- Image processing based PCB Inspection
- Product reliability testing
- Pre Compliance certification
Vision
To emerge as a centre of excellence in electronic product and RF component testing, validation, and certification, supporting industry and defence with advanced testing capabilities. To foster innovation, industry collaboration, and skilled human resources for next-generation electronic and RF products.
Mission:
- M1. To provide comprehensive testing, validation, and reliability assessment of electronic PCB, RF, antenna, and embedded systems across wide frequency ranges.
- M2. To support industry, startups, and defense sectors through collaborative testing services, consultancy, and technology transfer in association with industrial partners.
- M3. To train students and researchers with hands-on exposure to modern electronic product testing, ensuring readiness for industry and research careers.
Objectives:
- To provide advanced testing and validation facilities for electronic products, RF systems, embedded devices, and antennas.
- To promote research, innovation, and industry collaboration in electronic product development and testing.
- To develop skilled professionals through training, certification, consultancy, and hands-on learning in electronic product testing.
Focus Areas:
- Electronic Hardware Testing and Validation (PCB, embedded systems, mixed-signal boards)
- RF, Microwave and Antenna Measurements (Anechoic chamber, VNA, spectrum analysis)
- Wireless Communication and IoT Testing (USRP, RF communication, radar systems)
- Embedded Systems and Product Development
- Product Reliability and Pre-compliance Testing
- PCB Inspection and Quality Assurance
- Electronic Test Engineering Training and Skill Development
- Industry Consultancy, Start-up Support, and Product Certification
Collaborating Partners:
Thiagarajar Telekom Solutions Ltd, Madurai
People
Coordinator and Team Members:
- Dr. B. Manimegalai, Prof & Head / ECE
- Dr. N.Ayyanar, Assistant Professor /ECE
Infrastructure
- Advanced Testing Laboratories for mixed-signal boards, embedded systems, RF components, PCB inspection, and product reliability testing.
- Anechoic Chamber Facility for antenna characterization and RF measurements from 800 MHz to 20 GHz.
- Attitude Test chamber for reliability testing.
- State-of-the-art Test Equipment including Vector Network Analyzers (VNA), EMI-EMC pre-compliance chamber, Spectrum Analyzers, Signal Generators, Oscilloscopes, Probe Station, USRP Test Bench, LCR Meter, Radar Development Kits, and EMG Data Acquisition Systems.
Major Equipment:
- Vector Network Analyzers (Tektronix TTR503A, Keysight E5071C, Agilent N5230A)
- Spectrum Analyzers (Agilent E4407B, Keysight N9010A, Tektronix RSA306B)
- Signal Generators (Agilent E4438C, Rohde & Schwarz SMR20, GB Tech GB3091)
- Anechoic Chamber for Antenna Testing (800 MHz–20 GHz)
- Oscilloscopes, LCR Meter, and Probe Station
- USRP Wireless Communication Test Bench and FMCW Radar Development Kits
- Mixed-Signal, Embedded System, and EMG Data Acquisition Test Platforms
- EMI-EMC testing with pre compliance chamber
Software/Licenses:
- Keysight Advance Design System
- Tektronix TEKPAT measurement solution
- HFSS
Research Facilities:
- RF and Microwave Measurement Laboratory with advanced network analyzers, spectrum analyzers, and signal generators.
- Antenna Measurement Facility featuring a fully equipped anechoic chamber for 2D/3D radiation pattern and gain measurements.
- Embedded Systems and Mixed-Signal Testing Laboratory for hardware validation, debugging, and protocol analysis.
- Wireless Communication and Radar Research Facility with USRP platforms and FMCW radar development kits.
- Electronic Product Validation and Reliability Testing Facility supporting PCB inspection, product testing, and performance evaluation.
Activities and Events
Services Offered:
- Electronic Product Testing and Validation for PCBs, embedded systems, RF components, and antennas.
- Antenna Measurement and RF Characterization using anechoic chamber and advanced RF instrumentation.
- Product Reliability Testing and PCB Inspection for quality assurance and performance evaluation.
- Training, Certification, and Skill Development programs in electronic hardware testing.
- Consultancy and Technical Support for industries, MSMEs, start-ups, and research organizations.
- Research Collaboration and Product Development Support for academia and industry.
Courses Offered: (Industry Supported Courses / Courses incorporated in Curriculum)
- 22ECP10-Drone Systems, Navigation and Payload Integration
- 22EC1N0- Electromagnetic interference and Electromagnetic Compatibility
Students’ Projects:
- Design of a low-radar-visibility smart antenna
- Electromagnetic Design of a Frequency Selective Rasorber Integrated UAV Radome.
- Design and Simulation of a Ku-Band Slotted Waveguide Antenna for Ground-Based FMCW Radar System.
- Ku-band automotive Radar for object detection
- Conformal Antenna for GPS applications
Consultancy Activities:
- RF component testing and characterization
- Antenna measurement and characterization for defense and industrial applications
- Active and passive device measurements for academic project
- 2D/3D radiation pattern measurement
- Measurement of antenna gain, efficiency, EIRP, directivity and HPBW
- RF, mm-Wave and sub-THz system characterization
- Pre-certification and electronic product verification
- EMG data acquisition and sensor validation
- LCR and electrical parameter measurements
- Spectrum analysis and signal characterization
- Product reliability and performance testing
- EMI/EMC pre-compliance testing of electronic products
- Technical support for start-ups, MSMEs and incubatees in product testing.
Funded Projects:
- Design and development of a millimetre wave-based Road condition detection RADAR for automotive applications- MeitY-Rs.48L
- Development of Conformal antenna array for Avionics applications-DRDO-RS.14.8L
- Development of Fractal antennas for multiband wireless applications-DRDO – Rs.11L
- Fabrication of enhanced bending sensitivity using dual core PCF- SERB SURE- Rs.24L
Publications:
- MOODA, RAJESH, MANIMEGALAI B, Ravi Kumar Arya, and SURESH MN. "Design of low-profile, wideband circuit analog absorber (CAA) with high angular stability and high absorptivity." Physica Scripta (2026).
- Mooda, Rajesh. "A high angular stability ATA rasorber with enhanced absorption bandwidth and low in-band insertion loss." AEU-International Journal of Electronics and Communications (2026): 156309.
- Kanthamani, S., and J. Joslin Percy. "A systematic approach to equivalent circuit modelling of bistable lateral RF MEMS switch for redundancy selection." Microsystem Technologies 32, no. 7 (2026): 81.
- Percy, J. Joslin, S. Kanthamani, S. Mohamed Mansoor Roomi, and Thennarasan Sabapathy. "Strategies and approaches for RFID tag integration in textiles." Microelectronic Engineering 299 (2025): 112358.
- Harish, S., R. Vishwadhika, R. Shreya, S. Kanthamani, S. Mohamaed Mansoor Roomi, and G. Aninthitha. "XG-boost-based optimization of corrugated arm MEMS switch for improved radio frequency performance." Microsystem Technologies 31, no. 9 (2025): 2205-2220.
- Percy, J. Joslin, S. Kanthamani, and S. Mohamed Mansoor Roomi. "Machine learning-driven structural optimization of a bistable RF MEMS switch for enhanced RF performance." Micromachines 16, no. 6 (2025): 680.
- Bose, Meenambal, and Vasudevan Karuppiah. "Design and experimental characterization of an anisotropic transmissive metasurface for polarization conversion in upper mid-band 6G systems." Measurement 269 (2026): 120797.
- Jacob, Sherene, and Vasudevan Karuppiah. "Artificial magnetic conductor incorporated mode-controlled low-SAR body area networks antenna for bio-telemetry." International Journal of Microwave and Wireless Technologies 17, no. 8 (2025): 1320-1335.
- Jacob, Sherene, and Vasudevan Karuppiah. "Bio-realistic evaluation of an implantable antenna for safe neurostimulation medical system." AEU-International Journal of Electronics and Communications (2025): 156054.
- Bose, Meenambal, and Vasudevan Karuppiah. "Metamaterial inspired superstrate loaded miniaturized quad port MIMO antenna for 5G C-band applications." Optics Communications 574 (2025): 131123.
- Mohanraj, J., M. Valliammai, Lung-Jieh Yang, and N. Ayyanar. "A Highly Sensitive WS $ _ {2} $ Quantum Dots Nanocoated Surface Plasmonic Resonance Based Side Polished Fiber Sensor for Detection of Parkinson's Disease." IEEE Sensors Letters (2026).
- Sridevi, S., P. Anandan, N. Ayyanar, and Yanhua Luo. "Interpretable Pruned SpinalNet Network Regressor for Directional Bend Sensing Behavior Prediction of Dumbbell-Core Fiber Sensor." IEEE Sensors Journal (2026).
- Ayyanar, N., M. Kamaleshwar, N. R. Ramanujam, G. Thavasi Raja, Julia S. Skibina, and Fahad A. Alzahrani. "Numerical design of a high-sensitivity Spr biosensor for spike and nucleoprotein RBD detection in SARS-CoV-2 diagnostics." IEEE Transactions on Plasma Science 53, no. 6 (2025): 1333-1340.
Patents/IPR:
- G.Bargavi,T.R.Visves,R.Dheepika,R.Iyyappan,M.Ganeshkumar,G.Ananthi,N.B.Balamurugan,B.Manimegalai,System and Method for Dynamic Contexual Switching of Appliances,12.09.2025, Patent-Intellectual Property India. Patent Application Published, Application Number:202541079781, Journal Number 37/2025
- N.B.Balamurugan,B.Manimegalai,G.Ananthi,R.Yogeshwaran,P.Dharshini,R.Kanishka,N.Mohamed Nabeel Fayaz, K.Kaviya, S.Guhan, Dual Temp Thermo Electric Waterbottle, Patent-Intellectual Property India, Patent Application Published, Application Number:202541078549,Journal number 36/2025.
- B.Manimegalai, B.Sathyabama, G.Ananthi, K.A.Kameshwari, J.SharonFiora, R.Laksana, R.Yogeswaran, M.VelGnana Satish, Energy Efficient IoT and AI Driven Method for Multisource Carbon Emission Tracking,, Patent-Intellectual Property India, Patent Application Published, Application Number:202541077466,
- V.Ramya, S.LevinRohith, G.Ananthi, B.Manimegalai, Development of 3D Bio-printed Scaffolds Using Nata de Coco for Tissue Regeneration,17.01.2025, Patent-Intellectual Property India, Patent Application Published, Application number:202541001321.
Training Programmes Conducted:
- Winter Internship and Extended Internship on “RF Product Design and Testing” – 08–13 December 2025.
- Workshop on “Learn the Language of Electronics: Measurement Techniques with Keysight Instruments” – 13–14 November 2025.
- ANRF Sponsored FDP Schedule Five-Day Faculty Development Program on “Emerging Trends in Photonics and Fiber Optic Technologies” 16/02/2026 – 20/02/2026.
- Seminar on “5G and Beyond: The next Frontier”, 22-12-2025.
- Value added course on “Industry 4.0 Technologies”, 20 to 26 Dec 2025.
- FDP on “Wireless Communication system and emerging 6G technologies”, 20 to 24 April 2026.
- FDP on “EMI/EMC and Signal integrity practices for high speed systems” 5 to 6 March 2026.
- Two Week Summer Internship 2026 on “transforming concepts into products”, 09-06-2026 to 03-07-2026.
- Five day online FDP on “Recent trends and research challenges in 5G/6G RF front end and antennas”, 03-8-2026 to 07-08-2026.
Industry Interaction
Thiagarajar Telekom Solutions Ltd, Madurai
Gallery
Infrastructure Photo Gallery:

Anechoic chamber for radiated electromagnetic emission and immunity testing

ENA Series Network Analyzer, Keysight E5071C, 300KHz – 20GHz

Signal Generator, ROHDE&SCHWARZ SMR 20, 10MHz - 20GHz

EXA-Signal Analyzer, Keysight N9010A 10Hz –26.5GHz

LCR meter, Keysight E4980EL

ESG Vector Signal Generator, Agilent E4438C, 250KHz - 1GHz

Vector Network Analyzer, Tektronix TTR503A

Spectrum Analyzer, Agilent E4407B,9KHz-26.5GHz

Digital Programmable DC Power Supply, Scientific, PSD7303B
Activities Photo Gallery:
Industry Interaction and Student Training Activities








Contact Details:
Dr. B. Manimegalai,
Prof & Head / ECE,
Mail id: hodece@tce.edu
Dr. N. Ayyanar,
AP/ECE,
Mail id : naece@tce.edu