Skip to main content

Centre of Excellence in Electronic Design and Automation (EDA) Tools

 

Centre Of Excellence In Electronic Design Automation Tools

About the Centre

The Centre of Excellence in Electronic Design Automation (EDA) Tools at TCE was inaugurated on 27.10.2025 by Dr. Palanivel Thiaga Rajan, Hon’ble Minister for Information Technology and Digital Services, Government of Tamil Nadu, in the presence of Thiru. K. Hari Thiagarajan, Chairman and Correspondent, TCE. The Centre strengthens industry-oriented education, semiconductor and VLSI skill development, innovation, research, prototyping and entrepreneurship, creating a platform for developing next-generation electronics professionals.

 

Dr. Palanivel Thiaga Rajan, Hon'ble Minister for Information Technology and Digital Services, Government of Tamil Nadu, inaugurates the EDA Lab by cutting the ribbon, in the presence of Thiru. K. Hari Thiagarajan, Chairman and Correspondent, TCE.

Dr. Palanivel Thiaga Rajan, Hon'ble Minister for Information Technology and Digital Services, Government of Tamil Nadu, unveils the EDA Lab, in the presence of Thiru. K. Hari Thiagarajan, Chairman and Correspondent, TCE.

 

Dr. Palanivel Thiaga Rajan interacts with faculty members, including Dr. S. Rajaram, Registrar, TCE, and Dr. N.B. Balamurugan, Professor, TCE, during his visit to the EDA Lab.

 

 

Vision

To be a centre of excellence in Electronic Design Automation, providing a cutting-edge environment for students and researchers to master industry-standard tools and innovate in the design of integrated circuits (ICs) and electronic systems.

Mission:

A comprehensive mission for an EDA lab would include these key components:

  • Offer hands-on training
  • Facilitate VLSI design
  • Encourage research and development
  • Bridge the industry-academia gap
  • Promote lifelong learning
  • Develop professional skills

Objectives:

  1. To provide hands-on training in industry-standard EDA tools for UG, PG, and PhD students to enhance their employability in the semiconductor and VLSI sectors.
  2. To support research and prototype development in IC design, SoC development, device simulation, signal integrity, PCB design, RF modelling, and semiconductor device characterization.
  3. To create a collaborative ecosystem connecting academia, industry, start-ups, and research laboratories for high-impact projects in emerging electronic technologies.
  4. To promote innovation and entrepreneurship by organizing design challenges, hackathons, internships, and certification courses in advanced EDA workflows.
  5. To facilitate interdisciplinary learning by integrating EDA tools across domains such as electronics, electrical engineering, computer engineering, and applied sciences.
  6. To enable faculty development, capacity building, and curriculum advancement in sync with industry trends and semiconductor mission initiatives.

Focus Areas:

Semiconductor Devices | VLSI Design | Analog & Mixed-Signal ICs | Digital ASIC | FPGA & SoC | Physical Design | DRC/LVS | Low-Power VLSI | AI/ML Hardware | Chip Design | Industry Training & Research

Collaborating Partners:

  • MINISTRY OF ELECTRONICS AND INFORMATION TECHNOLOGY
  • Chips to Startup
  • ChipIN

People

Coordinator and Team Members:
  • Dr. S. Rajaram, Professor / ECE and Registrar
  • Dr. N. B. Balamurugan, Professor / ECE

Infrastructure

Major Equipment:

  • System – 25 Nos.
  • Renesas Quick connect beginner kit – 5 Nos.

Software/Licenses:

The Centre is equipped with a comprehensive suite of world-class EDA software, enabling end-to-end electronic design and verification:

  1. Synopsys - Sentaurus Device Simulation Tools: Sentaurus Process, Structure Editor (SDE), Visual / Inspect, Workbench, Quantum, Monte Carlo Simulator,Medici (Legacy), Taurus Tools (Legacy). Used for digital IC design, synthesis, PnR, STA, RTL verification, and design sign-off. Tools include Design Compiler, PrimeTime, ICC2, VCS, Verdi.
  2. Cadence Design Systems - Supports analog, digital, mixed-signal IC design, verification, and PCB development. Tools include Virtuoso, Spectre, Innovus, Allegro.
  3. Siemens EDA (Mentor Graphics) - Solutions for verification, formal checks, DFT, and PCB design. Tools include QuestaSIM, Calibre, PADS, HyperLynx.
  4. Silvaco TCAD - Simulation environment for semiconductor devices and materials. Used for HEMTs, FinFETs, MOSFETs, emerging 2D materials, and process/device modelling.
  5. Keysight ADS - High-frequency/RF, microwave, and communication system simulation. Useful for antenna modelling, RF circuits, filters, and high-speed systems.
  6. ANSYS - Electromagnetic, thermal, and multiphysics simulation. Tools include HFSS, Maxwell, and SIwave.
  7. Xilinx - FPGA design, synthesis, and embedded system development using Vivado and Vitis.

Research Facilities:

  1. Advanced semiconductor device modelling, TCAD simulation, and performance analysis.
  2. VLSI design, circuit simulation, verification, and mixed-signal design.
  3. FPGA design, synthesis, implementation, and hardware prototyping.
  4. RF, microwave, and high-frequency circuit design and characterization.
  5. Physical design, layout, design-rule verification, and GDSII generation.

Activities and Events

Services Offered:
  1. Support for academic and industrial research in semiconductor devices and VLSI systems.
  2. Design and simulation support for student projects, dissertations, and research publications.
  3. Assistance in circuit optimization, performance evaluation, and design validation.
  4. Training and hands-on technical support in EDA tools and VLSI design methodologies.
  5. Consultancy and collaborative research support for device, circuit, FPGA, and IC design.
Courses Offered: (Industry Supported Courses / Courses incorporated in Curriculum)

22EC520 – VLSI Circuits and Systems provides students with hands-on exposure to the complete VLSI circuit design flow using Cadence Virtuoso EDA tools. The integration of Cadence tools enables students to translate transistor-level circuit concepts into practical integrated-circuit designs and understand the relationship between circuit performance, physical layout, and manufacturability.

Students’ Projects:
  1. Investigation of Dielectric Wall Thickness Scaling on Electrostatic Integrity of Forksheet FETs
  2. Analytical Modelling and TCAD Simulation of Negative Capacitance Complementary Field Effect Transistor (NC-CFET)
  3. Performance Analysis of Gate Length Scaling in T-Gate AlGaN/GaN MIS-HEMTs Using TCAD Simulation
  4. Latent-Space Multi-Objective Optimization of GAA Nanowire FETs Using β-VAE, Heteroscedastic Surrogates, PAL and NSGA-III
  5. Analytical Modeling of Graphene Nanosheet Field-Effect Transistors Incorporating Quantum Effects
Consultancy Activities:

Nil

Funded Projects:

Nil

Publications:

Nil

Patents/IPR:

Nil

Training Programmes Conducted:
  1. One Week Skill Development Workshop on “EDA Tools for VLSI DESIGN” at Centre for Excellence EDA from 15.12.2025 to 20.12.2025.
  2. One Week Skill Development Workshop on “EDA Tools for VLSI DESIGN” at Centre for Excellence EDA from 04.05.2026 to 08.05.2026.
  3. On Week International Faculty Development Programme on “TCE VLSI Week 2026: Future of VLSI Design - From CMOS Scaling to AI driven Chip Engineering” from 06.07.2026 to 10.07.2026.
  4. One Week MEITY ICT Academy – Faculty Development Program (Phase III) on “VLSI DESIGN FLOW: From RTL to GDSII” at Centre for Excellence EDA from 13.07.2026 to 17.07.2026.
Industry Interaction

Nil

Infrastructure Photo Gallery:

 

Plaque commemorating the inauguration of the Centre of Excellence in Electronic Design Automation Tools, sponsored by MeitY – Chips to Startup (C2S) – ChipIN.

Interior view of the newly inaugurated Centre of Excellence in Electronic Design Automation Tools, equipped with advanced computing systems for EDA training and research. 

 

 

 

 

 

 

 

Activities Photo Gallery:

 

Group photograph of faculty, staff, and participants of the One Week Skill Development Workshop on "EDA Tools for VLSI Design," held from 15.12.2025 to 20.12.2025

Dr. S. Rajaram, Registrar, TCE, handled session for the Faculty Member in Various colleges for the One Week Skill Development Workshop on "EDA Tools for VLSI Design" from 15.12.2025 to 20.12.2025

 

Dr. N.B. Balamurugan and Dr.D.Gracia Nirmala Rani handled handled sessions for the Faculty members in EDA Lab.

Group photograph of faculty, staff, and participants of the One Week Skill Development Workshop on "EDA Tools for VLSI Design," held from 04.05.2026 to 08.05.2026, at the EDA Lab, TCE

 

Dr. V. Vinoth Thiagarajan, TCE, handling a session during the Workshop on "EDA Tools for VLSI Design"

Group photograph of faculty, students, and participants at "TCE VLSI Week 2026: Future of VLSI Design – From CMOS Scaling to AI-Driven Chip Engineering," with Dr. Madhavan Swaminathan, Head, Department of Electrical Engineering, William E. Leonhard Endowed Chair, Penn State University, USA, as Chief Guest.

 

Industrial visit at TCE Telekom Services in VLSI Week 2026

Group photo for MEITY ICT Academy – Faculty Development Program (Phase III) on “VLSI DESIGN FLOW: From RTL to GDSII” from 13.07.2026 to 17.07.2026

 

Mr. Rajkumar, Optem Technologies, delivering a session during the Faculty Development Program (Phase III) on "VLSI Design Flow: From RTL to GDSII" 

 

 

Contact Details:

Dr. N. B. Balamurugan 
nbbalamurugan@tce.edu