Publications 2017-2021
List of Publications in Journals
2021
| Sl.No | Title |
|---|---|
| 1 | P Maran, R Pandiyarajan, "Influences of ZrO2 and B4C reinforcement on metallurgical, mechanical, and tribological properties of AA6082 hybrid composite materials", Journal of Ceramic Processing Research, 22(3) 2021, pp. 306-316. |
| 2 | Palaniappan PL K, Umar Mohamed, Pandiyarajan R , Maran PInfluences of ZrO2 and B4C reinforcement on metallurgical, mechanical, and tribological properties of AA6082 hybrid composite materials, Journal of Ceramic Processing Research, 2021. Vol 22, Issue 3 PP 306-316. |
| 3 | B. Eanest Jebasingh and Dr. A.Valan Arasu, Synthesis of Graphene Using Modified Chemical Reduction Method, Indian Patent Office Journal, Application No.202141028545 A, 28/2021, 09/07/2021 |
| 4 | Dr.A.Valan Arasu D.Dhinesh Kumar and A. Idrish Khan, Experimental Validation of Enhancement in Thermal Conductivity of Titania/Water nanofluid by the Addition of Silver Nanoparticles International Communications in Heat and Mass Transfer, Vol. 120, 104910, 2021https://doi.org/10.1016/j.icheatmasstransfer.2020.104910 |
| 5 | S. Karthikeyan, S. Rajkumar, "Assessment of Jasmine Supply Chain Centered Upon Nilakotai Market", International Journal of Science, Engineering and Management (IJSEM), Vol 6, Issue 7, July 2021, (ISSN (Online) 2456 -1304) |
| 6 | Published a research paper entitled on “Utilization of tyre rubber hybrid with ceramic and wood for impact energy absorption application” Polymer and Polymer Composite, April 27, 2021. |
| 7 | Sampath Boopathi, V Balasubramani, R Sanjeev Kumar and G Robert Singh ,The influence of human hair on kenaf and Grewia fiber-based hybrid natural composite material: an experimental study, Functional Composites and Structures, Volume 3, Number 4, 2021 |
| 8 | S. Umar Sherif, P. Asokan, P. Sasikumar, K. Mathiyazhagan and J. Jerald, “Integrated optimization of transportation, inventory and vehicle routing with simultaneous pickup and delivery in two-echelon green supply chain network”, Journal of Cleaner Production, Vol. 287, (2021), 125434. (ABDC – A; Impact Factor: 11.1, Web of Science; SCI-E indexed journal) |
| 9 | K Rajesh, MP Natarajan, PK Devan, S Ponnuvel, V Dillibabu, ... Recent Advances in Energy Technologies: Select Proceedings of ICEMT 2021 Effect of intake air preheat on diesel engine performance fueled with coconut fatty acid distillate biodiesel |
| 10 | R. Maniarasu, Sushil Kumar Rathore and S. Murugan, “A review on materials and processes for carbon dioxide separation and capture”, Energy and Environment, Sage Publisher, Volume 34, Issue 1, pp. 3-57, Nov 2021, https://doi.org/10.1177/0958305X211050984. |
| 11 | B. Varun Kumar, G Manikandan, P Rajesh Kanna “Enhancement of heat transfer in SAH with polygonal and trapezoidal shape of the rib using CFD” Energy, 2021 - IF -9. |
| 12 | K Srithar, R Saravanan, R Srinivasan, T Rajaseenivasan, R Venkatesan, et al., "Vapour compression refrigeration with biomass operated bubble column humidification and dehumidification desalination system", Desalination and Water Treatment, 217, pp. 52-62, 2021. |
| 13 | K Srithar, R Saravanan, N Balachandran, "COP enhancement in Vapour Compression Refrigeration system", Air Conditioning and Refrigeration Journal, pp. 71-75, 2021. |
2020
| Sl.No | Title |
|---|---|
| 1 | J Umar Mohamed, PL K Palaniappan, P Maran, R. Pandiyarajan "Investigation and optimization of friction stir welding process parameters of stir cast AA6082/ZrO/BC composites", Materials Science-Poland 38 (4), 2020 pp. 715-730. |
| 2 | P Maran, S Boopathi, P Gowtham, S Chidambaram, Prediction of lean blowout limits for methane-air bluff body stabilized combustion using a temperature gradient method in a model gas-turbine afterburner, International Journal of Turbo & Jet-Engines 37 (4), 2020, pp. 343-352. |
| 3 | Palaniappan PL K, Umar Mohamed, Pandiyarajan R , Maran , Investigation and optimization of friction stir welding process parameters of stir cast AA6082/ZrO2/B4C composites, Materials Science-Poland, 2020 V38(40 PP 715-730. |
| 4 | T. Kamatchi, P.L.K. Palaniappan, "Healthcare relational coordination: a review on parameter selection for modified high performance work practices", International Journal of Services and Operations management, 2020Vol 35, Issue 2, PP 137-158 |
| 5 | Navakodi Gurusamy, Jawahar Natarajan, Palaniappan Kanagasabai Palaniappan,"Parameter Optimization of the CNC Wire-Cut EDM Process for Machining Aluminium 6063-B4C Metal Matrix Composites" Transactions of FAMENA, Volume 43 (4), Year 2020, Pages 91--108 |
| 6 | C.Pownraj and Dr.A.Valan Arasu, Preparation and characterization of low cost eco-friendly GAO grafted bio‑carbon nanoparticle additive for enhancing the lubricant performance,Volume 108-107921, https://doi.org/10.1016/j.diamond.2020.107921, 2020 |
| 7 | B.Eanest Jebasingh and Dr.A.Valan Arasu, Characterisation and stability analysis of eutectic fatty acid as a low cost cold energy storage phase change material, Journal of Energy Storage - Elsevier, Vol.31, 101708, https://doi.org/10.1016/j.est.2020.101708, 2020 |
| 8 | B.Eanest Jebasingh and Dr.A.Valan Arasu, A detailed review on heat transfer rate, supercooling, thermal stability and reliability of nanoparticle dispersed organic phase change material for low-temperature applications, Materials Today Energy - Elsevier, Vol. 16 – 100408, https://doi.org/10.1016/j.mtener.2020.100408, 2020 |
| 9 | V. Mayilvelnathan and Dr.A. Valan Arasu, Performance investigation of shell and helical tube heat energy storage system with graphene dispersed erythritol PCM, Energy Storage - Wiley, https://doi.org/10.1002/est2.198, July 2020 |
| 10 | B.Prabhu and Dr.A.Valan Arasu, Effect of titania-silver nanocomposite particle concentration and thermal cycling on characteristics of SDS added paraffin wax thermal energy storage material, Energy Storage - Wiley, https://doi.org/10.1002/est2.192, July 2020 |
| 11 | Dr. Sandro Nizetic, Dr. Miso Jurcevic Dr. Müslüm Arıcı, Dr. A. Valan Arasu, Dr.Gongnan Xie, Nano-enhanced phase change materials and fluids in energy applications: A review, Renewable and Sustainable Energy Reviews-Elsevier, Vol. 129 -109931https://doi.org/10.1016/j.rser.2020.10993, 2020 |
| 12 | C.Pownraj and Dr.A.Valan Arasu, Effect of dispersing single and hybrid nanoparticles on tribological, thermophysical, and stability characteristics of lubricants: a review, Journal of Thermal Analysis and Calorimetry-Springer, https://doi.org/10.1007/s10973-020-09837-y, 2020 |
| 13 | Dr. R.Manikumar and Dr. A.Valan Arasu, Design and Performance Characteristics Analysis of a Linear Fresnel Reflector Solar Concentrator System with a Trapezoidal Cavity Absorber, International Journal of Emerging Technology and Advanced Engineering, Volume 10, Issue 05, pp. 146-153, May 2020 |
| 14 | B.Prabhu and Dr.A.Valan Arasu, Stability analysis of TiO2eAg nanocomposite particles dispersed paraffin wax as energy storage material for solar thermal systems, Renewable Energy - Elsevier Journal, Vol.152, pp.358-367, 2020 |
| 15 | B.Eanest Jebasingh and Dr.A.Valan Arasu, A comprehensive review on latent heat and thermal conductivity of nanoparticle dispersed phase change material for low-temperature applications, Energy Storage Materials– Elsevier Journal, Vol. 24, pp. 52-74, 2020 |
| 16 | V. Mayilvelnathan and Dr.A. Valan Arasu, Experimental investigation on thermal behavior of graphene dispersederythritol PCM in a shell and helical tube latent energy storage system, International Journal of Thermal Sciences- Elsevier, Vol. 155, 106446, https://doi.org/10.1016/j.ijthermalsci.2020.106446, 2020 |
| 17 | D.Dhinesh Kumar and Dr.A.Valan Arasu, Experimental investigation on dimensionless numbers and heat transfer in nanocompositefluid shell and tube heat exchanger, Journal of Thermal Analysis and Calorimetry-Springer, https://doi.org/10.1007/s10973-020-09579-x,2020 |
| 18 | S. Karthikeyan, "Minimize the Material Handling Time of Agricultural Finished Goods" International Journal of Engineering Research & Technology (IJERT), Vol. 9 Issue 04, pp - 585-591, April-2020, (ISSN: 2278-0181), IJERTV9IS040408. |
| 19 | Karthic. M., K.Chockalingam., and SS ram "Prediction of tensile strength in fused deposition modeling process using artificial neural network technique"AIP Conference Proceedings, Volume 23117 December 2020 (Scopus Indexed) |
| 20 | S. Umar Sherif, P. Sasikumar, P. Asokan and J. Jerald, “An eco-friendly closed loop supply chain network with multi-facility allocated centralized depots for bidirectional flow in a battery manufacturing industry”, Journal of Advances in Management Research, Vol. 17 No. 1, (2020). pp. 131 – 159. (Web of Science (E-SCI)) |
| 21 | S Arunkumar, A review on aluminium matrix composite with various reinforcement particles and their behaviour, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.05.053S. |
| 22 | R. Ashok Kumar. R, S.J. Akash, S. Arunkumar, V. Balaji, M. Balamurugan, Fabrication and Corrosion Behaviour of Aluminium Metal Matrix Composites – A Review, 923 (2020) 1–10. https://doi.org/10.1088/1757-899X/923/1/012056. |
| 23 | Vignesh G, Sathiya Narayanan C & Pandivelan C (2020) Study on formability and dislocation density in forming of hemispherical cup. Materials Today: Proceedings, 27, 2005-2010. |
| 24 | Vignesh G, Sathiya Narayanan C & Pandivelan C (2020) Review on multi-stage incremental forming process to form vertical walled cup. Materials Today: Proceedings, 27, 2297-2302. |
| 25 | MS Govardhanan, G Kumaraguruparan, M Kameswari, R Saravanan, K Srithar, "Photovoltaic module with uniform water flow on top surface", International Journal of Photoenergy, 2020 (1), 8473253, 2020. |
| 26 | M Vivar, M Fuentes, N Pichel, A López-Vargas, MJ Rodrigo, K Srithar, "Photovoltaic and solar disinfection technology meeting the needs of water and electricity of a typical household in developing countries: From a Solar Home System to a full...", Science of The Total Environment, 747, 141082, 2020. |
2019
| Sl.No | Title |
|---|---|
| 1 | R Pandiyarajan, P Maran, N Murugan, S Marimuthu, T Sornakumar, Friction stir welding of hybrid AA 6061-ZrO2-C composites FSW process optimization using desirability approach, Materials Research Express (2019) 6 (6), 066553 |
| 2 | R Pandiyarajan, P Maran, S Marimuthu, K Arumugam, Mechanical and metallurgical characterization of friction stir welded AA6061-ZrO2-C hybrid MMCsMaterials Today: Proceedings (2019) 19, 256-259 |
| 3 | B. Eanest Jebasingh and Dr. A.Valan Arasu, Heat Absorbing Phase Change Meterial for Helmet Cooling, Indian Patent Office Journal, Application No.201941046636 A, 49/2019, 06/12/2019 |
| 4 | B. Eanest Jebasingh and Dr. A.Valan Arasu, Low Temperature Phase Change Material with High Latent Heat, Indian Patent Office Journal, Application No.201941045263 A, 48/2019, 29/11/2019 |
| 5 | Dr.A.Valan Arasu, D. Dhinesh Kumar and A. Idrish Khan, Experimental investigation of thermal conductivity and stability of TiO2-Ag/water nanocompositefluid with SDBS and SDS surfactants, Thermochimica Acta – Elsevier Journal, Vol. 678, 178308, 2019 |
| 6 | Idrish Khan and Dr.A.Valan Arasu, A review of influence of nanoparticle synthesis and geometrical parameters on thermophysical properties and stability of nanofluids, Thermal Science and Engineering Progress-Elsevier Journal, Vol.11, pp. 334–364, 2019 |
| 7 | M. Babu, Sachin S. Raj and Dr.A.Valan Arasu, Experimental analysis on Linear Fresnel reflector solar concentrating hot water system with varying width reflectors, Case Studies in Thermal Engineering - Elsevier Journal, Vol. 14, 100444, 2019 |
| 8 | Effective Implementation of Padlet ICT Tool for Engineering Education, International Journal of Innovative Technology and Exploring Engineering, Vol. 8, No. 8, pp. 1586-1590, 2019, ISSN: 2278-3075 |
| 9 | S. Karthikeyan, "A Mixed Integer Linear Programming model for optimum segregation and distribution of medical wastes", International Journal of Research and Analytical Reviews (IJRAR), Volume 6, Issue 1, January 2019, pp 548-553, (E-ISSN 2348-1269, P- ISSN 2349-5138) |
| 10 | Use of Spreadsheet for A Mixed Integer Linear Programming Model - Multi-Objective Flow Shop Scheduling With Normalisers, International Journal of Research in Advent Technology, Vol.7, No.4, April 2019. |
| 11 | Demand Forecasting and Inventory cost Reduction for the Antibiotics for inpatients in Hospital using Markov Decision process, International Journal of Research and Analytical Reviews, Vol.6 Issue:1, Jan 2019. |
| 12 | 1.Balamurali, M, Jawahar, N, Balaji, S & Manichandran, T 2019 ‘Realization of effective laser blanking process by heat zone spread resistance coating and optimization methods’, Materials Research Express, vol.6, issue 4. (Published Online). Impact Factor: 1.51 |
| 13 | S. Umar Sherif, P. Sasikumar, P. Asokan and J. Jerald, “Bi-objective optimisation model with societal constraints for green closed loop supply chain network – a case of battery industry”, International Journal of Productivity and Quality Management, Vol. 27 No. 3, (2019). pp. 276 – 304. (SCOPUS) |
| 14 | R. Maniarasu, Rajesh. P. K., Sudhir Kumar. V, Manikandan. N, “Virtual optimization of sitting posture analysis on using low-cost load cell based on various sitting position in automobile seating for comfort and safety”, International Journal of Mechanical Engineering and Technology (IJMET), Volume 10, Issue 06, pp. 292-302, June 2019. |
| 15 | Vignesh G, Sathiya Narayanan C, Pandivelan C, Shanmugapriya K, Tejavath BN, & Tirupathi L (2019) Forming, fracture and corrosion behaviour of stainless steel 202 sheet formed by single point incremental forming process, Materials Research Express, 6(12), 126540. |
2018
| Sl.No | Title |
|---|---|
| 1 | A Krishnan, P Maran, K Aravindhan, T Sornakumar,Effect of Additional Air Supply for Combustion of Straight Vegetable Oil Blends on Performance of Mini Hot Water Generator, Mechanika (2018) 24 (2), 278-283 |
| 2 | K.Chockalingam.,M.Karthic., and N.Jawahar "Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling" 2018, Vol. 11, Issue 2, PP. 27-37. |
| 3 | Dr. R.Manikumar and Dr. A.Valan Arasu, A Feasibility Study of Carbon-dioxide Based Rankine Cycle Powered by the Linear FresnelReflector Solar Concentrator System, Distributed Generation & Alternative Energy Journal, Vol. 33, Issue 2, PP. 58-80, 2018 |
| 4 | V. Mayilvelnathan and Dr.A. Valan Arasu, Numerical and experimental investigation of latent heat thermal energy storage system using erythritol as a PCM, Journal of the Chinese Society of Mechanical Engineers, Vol.39, No.5, pp.450 - 469, 2018 |
| 5 | D.Dhinesh Kumar and Dr.A.Valan Arasu, 'A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids', Renewable & Sustainable Energy Reviews, Volume 81, Issue P2, pp. 1672-1692, 2018 |
| 6 | Analysis of Cutting Oil on Surface Finish for Turning Operation and A Case Study on Preparation of CuO Nanofluid Based Cutting Fluid, International Journal of Mechanical and Production Engineering, Vol.6, No. 4, pp.14-18, 2018, ISSN online:2321-2071ISSN print:2320-2092 |
| 7 | Analysis of Cutting Oil on Surface Finish for Turning Operation and A Case Study on Preparation of CuO Nanofluid Based Cutting Fluid, International Journal of Mechanical and Production Engineering, Vol.6, No. 4, pp.14-18, 2018, ISSN:2321-2071 |
| 8 | Persistency Improvement through Six Sigma in Life Insurance Industry, International journal of Modern Engineering Research,Vol.8, Issue 5, V2, May 2018. |
| 9 | Balasubramani V, Nikhila R, Alice Nila M, Numerical prediction of interlaminar stresses in laminated composites, IOP Conf. Series: Materials Science and Engineering 402 (2018) 012121 |
| 10 | V Balasubramani, D Sharath Subramanian and N Vignesh, Design and fabrication of a tool changing mechanism for cylinder block in a vertical milling machine, IOP Conference Series: Materials Science and Engineering, Volume 402, 2018. |
| 11 | K.Chockalingam.,M.Karthic., and N.Jawahar "Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling" 2018, Vol. 11, Issue 2, PP. 27-37. |
| 12 | R. Ashok Kumar, A. Devaraju, S. Arunkumar, Experimental Investigation on Mechanical Behaviour and Wear Parameters of TiC and Graphite Reinforced Aluminium Hybrid Composites,Mater.TodayProc.5(2018)14244–14251.https://doi.org/10.1016/j.matpr.2018.03.005. |
| 13 | R. Maniarasu and Rajesh. P. K., “Ergo-human optimum sitting position with enhance the biomechanics to maintain the natural curvature of spine posture in prominent support and high comfort of backrest in automobile seating”, International Journal of Mechanical Engineering and Technology (IJRST), Volume 04, Issue 08, pp. 162-169, June 2018, DOI: 10.32628/IJSRST184839. |
| 14 | Varun Kumar B, G Manikandan, P Rajesh Kanna, Dawid Taler, Jan Taler, Marzena Nowak-Ocłoń, Karol Mzyk, Hoong Thiam Toh “A Performance Evaluation of a Solar Air Heater Using Different Shaped Ribs Mounted on the Absorber Plate—A Review” Energies, 2018 - IF -3.1. |
| 15 | K Srithar, T Rajaseenivasan, "Recent fresh water augmentation techniques in solar still and HDH desalination–A review", Renewable and Sustainable Energy Reviews, 82, pp. 629-644, 2018. |
| 16 | K Srithar, T Rajaseenivasan, M Arulmani, R Gnanavel, M Vivar, et al., "Energy recovery from a vapour compression refrigeration system using humidification dehumidification desalination", Desalination, 439, pp. 155-161, 2018. |
| 17 | K Srithar, T Rajaseenivasan, M Sabeer, T Thirunavukkarasu, V Pavendan, "Heat Transfer Study in CPC Solar Water Heater with Turbulators", TIDEE: TERI Information Digest on Energy and Environment, 17 (1), pp. 13-23, 2018. |
2017
| Sl.No | Title |
|---|---|
| 1 | R. Pandiyarajan, P. Maran, S. Marimuthu, K.C. Ganesh, Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C, Journal of Mechanical Science and Technology (2017) 31 (10), 4711-4717 |
| 2 | S. Boopathi, P. Maran, Effect of Air Pressure and Gutter Angle on Flame Stability and DeZubay Number for Methane-Air Combustion, International Journal of Turbo & Jet Engines (2017) Vol. 34 (1) pp. 95 to 102. |
| 3 | R Pandiyarajan, P Maran, S Marimuthu and K C Ganesh, Synthesis and characterization of zirconium dioxide particulate reinforced aluminium alloy metal matrix composite, Indian Journal of Engineering & Materials Sciences, (2017) Vol. 24 (10), pp. 390-396 |
| 4 | K. Arumugam, P. Maran, K. Satheeshkumar, CERTAIN INVESTIGATION IN A COMPRESSION IGNITION ENGINE USING RICE BRAN METHYL ESTER FUEL BLENDS WITH ETHANOL ADDITIVE, Thermal Science (2017) 21 (1B) pp. 535 to 542. |
| 5 | Calwin S Parthibaraj, PLK Palaniappan, Nachiappan Subramanian,Angappa Gunasekaran, " Multi-agent system with iterative auction mechanism for master bay plan problem in marine logistics" Maritime Policy & Management.2017 Volume 44, - Issue 6 |
| 6 | Clinton, I. Mohammed Farhaan and Dr.A. Valan Arasu, 'Theoretical analysis of thermal performance enhancement of an automobile radiator with nanofluid', International Journal of Applied Physical Science, Volume 9 Issue 4, pp. 144-151,2017 |
| 7 | S. Karthikeyan, Texture and morphology based conductivity analysis of fuel cell - bipolar plate using scanning electron microscopic images, Indian Journal of Engineering & Materials Sciences, Vol. 24, August 2017, pp.261-269 |
| 8 | R.Sivasubramanian, G.Venkatesann P>Sivakumar, R.Sivasankaran. “Simulated annealing algorithm for minimizing assembly variation in nonlinear assembly”. International Journal of Manufacturing Technology and Management”. 2017. |
| 9 | Jawahar, N, Sivasankaran, R, Kanagaraj, G. “ Bi-Objective optimization tolerance allocation in an interchangeable assembly under diverse manufacturing management. International Journal of Advanced Manufacturing Technology. 2017. |
| 10 | K Srithar, KA Balasubramanian, V Pavendan, BA Kumar, "Experimental investigations on mixing of two biodiesels blended with diesel as alternative fuel for diesel engines", Journal of King Saud University-Engineering Sciences, 29 (1), pp. 50-56, 2017. |
| 11 | T Rajaseenivasan, K Srithar, "Potential of a dual purpose solar collector on humidification dehumidification desalination system", Desalination, 404, pp. 35-40, 2017. |
| 12 | K Srithar, T Rajaseenivasan, "Performance analysis on a solar bubble column humidification dehumidification desalination system", Process Safety and Environmental Protection, 105, pp. 41-50, 2017. |
| 13 | T Rajaseenivasan, K Srithar, "An investigation into a laboratory scale bubble column humidification dehumidification desalination system powered by biomass energy", Energy Conversion and Management, 139, pp. 232-244, 2017. |
| 14 | T Rajaseenivasan, SR Prasanth, MS Antony, K Srithar, "Experimental investigation on the performance of an impinging jet solar air heater", Alexandria Engineering Journal, 56 (1), pp. 63-69, 2017. |
| 15 | C Muthusamy, K Srithar, "Energy saving potential in humidification-dehumidification desalination system", Energy, 118, pp. 729-741, 2017. |
| 16 | T Rajaseenivasan, R Prakash, K Vijayakumar, K Srithar, "Mathematical and experimental investigation on the influence of basin height variation and stirring of water by solar PV panels in solar still", Desalination, 415, pp. 67-75, 2017. |
| 17 | K Srithar, T Rajaseenivasan, G Hari Prasath, P Saravanan, "Augmentation of distillate yield in a parabolic concentrator integrated solar still", Journal of Desalination and Water Purification, 9, pp. 10-15, 2017. |
List of Publications in Conferences
2021
| Sl.No | Title |
|---|---|
| 1 | Palaniappan PL.K. and Ram Prasad, Paper titled “A Review On Sustainable Supply ChainFor Perishable Products” at 8th InternationalConference on Business Analytics and Intelligence,20-22 December 2021, IISC Bangalore |
2020
| Sl.No | Title |
|---|---|
| 1 | S. Karthikeyan, "Study of friction stir welding on aerospace grade ZE41AMG alloy and its comparison with laser beam welding on ZE41AMG alloy" TEQIP III Sponsored International Conference on Recent Advances in Manufacturing (RAM 2020) on 3-5 July 2020 organized by S V National Institute of Technology, Surat, Gujarat |
| 2 | Presented a paper titled "Prediction of tensile strength in fused deposition modeling process using artificial neural network technique" in3rd International Conference on Frontiers in Automobile and Mechanical Engineering (FAME 2020) by the School of Mechanical Engineering at Sathyabama Institute of Science and Technology (Deemed to be University), Chennai. |
| 3 | R. Maniarasu, Sushil Kumar Rathore, S. Murugan. Presented the paper entitled “Potential of using biomass-based activated carbon for carbon dioxide capture” at the International Conference on Advances in Renewable and Sustainable Energy Systems (ICARSES2020), SRMIST, Kattankulathur, Chennai, India, during 3th-5th Dec 2020. |
2019
| Sl.No | Title |
|---|---|
| 1 | R Pandiyarajan, P Maran, S Marimuthu, K Arumugam, Mechanical and metallurgical characterization of friction stir welded AA6061-ZrO2-C hybrid MMCsMaterials Today: Proceedings (2019) 19, 256-259 |
| 2 | S Boopathi, P Maran, K Arumugam, Experimental investigation of flame stabilization using conical bluff body for thrust augmenters, AIP Conference Proceedings, 2019, Volume 2161 (1) pp. 020035. |
| 3 | Arumugam, P Maran, S Boopathi, Emission and performance investigation on CI engine by using soybean methyl ester with ethanol additive,AIP Conference Proceedings, 2019, Volume 2161 (1) pp. 020031. |
2018
| Sl.No | Title |
|---|---|
| 1 | R. Pandiyarajan, P. Maran, S. Marimuthu, " Effect of ZrO2 and Graphite Particulates on Mechanical Behaviour of Aluminium Matrix Composite, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, 18-20, January 2018 |
| 2 | R. Rajeshshyam, K. Chockalingam, V. Gayathiri and T. Prakash., "Reduction of metallosis in hip implant using thin film coating"., International Conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943, 020090 (2018); doi: 10.1063/1.5029666 |
| 3 | K.A.Arirajan, K.Chockalingam and C.Vignesh"Selection of contact bearing couple materials for hip prosthesis using finite element analysis under static conditions", International conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943,020013(2018); https://doi.org/10.1063/1.5029589 |
| 4 | Palaniappan PL.K and Aravindh M, " Perishable Food Supply Chain Management: Literaure Review and Directions for Future Research" , International conference on Business Analytics and Intelligence 2018", at IISc Bangalore during 20-22 Dec 2018 |
| 5 | MAHADEVAN,ML., Md. Azarudeen, and Jerald Wilson. “Design and development of portable emission absorbent using design for six sigma tool”.International Conference on ‘ADVANCES IN INDUSTRIAL ENGINEERING APPLICATIONS, Jan3-5 2018, CEG,AU, Chennai |
| 6 | R. Rajeshshyam, K. Chockalingam, V. Gayathiri and T. Prakash., "Reduction of metallosis in hip implant using thin film coating"., International Conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943, 020090 (2018); doi: 10.1063/1.5029666 |
| 7 | T. Prakash, Ganesh and Hariraj, "Experimental investigation of Hydroxyyapitite with Enamel Matrix derivative Coating on 316L Stainless Steel for dental Application", National Conference on New Scientific Creation in Engineering and Technology [NSCET-2K18] On 16th March, 2018. |
| 8 | T. Prakash, Ajith Kumar and Krishnamadhan, "Knee Joint Implant Manufacturing using cow and sheep bone", National Conference on New Scientific Creation in Engineering and Technology [NSCET-2K18] On 16th March, 2018. |
| 9 | T. Prakash and G. Karthik, "Structural Analysis of Titanium Coated Stainless Steel Plate Support for Human Fractured Femur Bone", Internal Conference on Advances in Engineering and Technology on 8-9th March, 2018 |
| 10 | K.A.Arirajan, K.Chockalingam and C.Vignesh"Selection of contact bearing couple materials for hip prosthesis using finite element analysis under static conditions", International conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943,020013(2018); https://doi.org/10.1063/1.5029589 |
| 11 | N. Vimal Kumar, C. Selva Kumar, "Development of collision free path planning algorithm for warehouse mobile robot", Procedia Computer Science Volume 133, July 2018, Pages 456-463. DOI https://doi.org/10.1016/j.procs.2018.07.056 |
2017
| Sl.No | Title |
|---|---|
| 1 | Presented paper titled " An Investigation of Mechanical Behaviour of Al7075 with Al2o3" in National Conference on " Emerging trends in Mechanical Engineering" on 16th March 2017 |
| 2 | Presented a paper titled " Hardness test on Aluminium based composites" in National Conference on " Emerging trends in Mechanical Engineering" on 16th March 2017. |
| 3 | Presented paper titled " A Review of Mechanical properties of Stir Cast Aluminium Matrix Composites" in National Conference on " Emerging trends in Mechanical Engineering" on 16th March 2017. |